WATERPROOFING CHEMICALS

Product Details:

Multipurpose highly polymer modified adhesive for fixing large format tiles and stones on interior and exterior floor & wall.

Colour: Grey and white Coverage: Approx 55-60 sft per 20kg bag with 1/4” x 1/4” (6mm x 6mm) square notched trowel for average bed of 3mm. Coverage will vary depending on trowel notch size, type and size of tile and substrate smoothness and evenness.

All surfaces should be between 40° F(4°C) and 104° F(40°C) and structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds. Check the surface to be true to plumb. All slabs must be plumb and true to within ¼”(6mm) in 10 ft(3m). Rough or uneven concrete surfaces should be made smooth with LATICRETE® Screed/Plaster material to provide a wood float (or better) finish. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off. Installation may be made on a damp surface. New concrete slabs shall be damp cured and 28* days old before application. *No minimum cure time for concrete slabs when thin-set mortar is mixed with latex additive. Expansion joints shall be provided through the tile work from all construction or expansion joints in the substrate. Do not cover expansion joints with adhesive mortar. Follow ANSI Specification AN-3.8 “Requirements for Expansion Joints” or TCA Detail EJ171 “Expansion Joints”. For tile installation over Cement Backer Board: follow TCA installation details W244

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 20 Kg

Product Details:

CHRYSO PROOF ACRYLIC is acrylic polymer based elastomeric,waterproofing protective coating system. In addition to UVresistance acrylic polymer, CHRYSO PROOF ACRYLIC is designedwith proprietary additives to resist post growth of algae andfungus. The thixotropic nature of the coating helps to apply thickfilm to get desired film thickness (1 to 1,5mm) with minimum noof coats.

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: BUCKET

Product Details:

TAPECRETE P151, popularly known as TAPECRETE is an acrylic based PolymerModified Cementitious Composite coating system. TAPECRETE in conjunction withcement provides properties to combat the shortcomings of plain cement, particularly itspoor adhesion properties, low impact strength, low flexural strength and thin sectionfragility. TAPECRETE Polymer adds to the potential use as well as enhances theproperties of cement slurry/ mortar/concrete making them excellent choice for use in newas well as renovation work

Additional Information:

• Delivery Time: IMMEIDATE
• Packaging Details: 20 LTR

Product Details:

MasterProtect 200 is a single component, flexible, elastomeric coating based on acrylic co-polymers. The coating enables long term protection of concrete &masonry from aggressive atmospheric gases such as, carbon dioxide, sulphur dioxide and chloride ions & prevents water ingress. It is available in standard pastel colours. It can be made available in custom colours subject to prior agreement.

MasterProtect 200 is recommended for external protection of concrete to prevent ingress of atmospheric corrosive gases, wind driven rain, and water borne chlorides. Applications include protection of: ??? RCC Frame structures with masonry infill ??? Residential & Commercial Buildings ??? Multi storey car parks & podiums ??? Overhead water tanks. ??? Industrial buildings and power plants. MasterProtect 200 is not recommended for application in areas likely to be submerged in water and on floors subjected to traffic.

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 20 Litter

Product Details:

Elastomeric Polysulphide Sealant For Concrete Expansion Joints

CICO SEALANT T 680 is two pack Polysulphide based joint sealant and available in GUN GRADE and POUR GRADE. CICO SEALANT T 680 gun grade is gun applied, non-sag type for vertical joints and CICO SEALANT T 680 pour grade is for horizontal movement joints. When two packs are mixed, i.e. Polysulphide resin (Pack-A) with curing agent (Pack-B), it forms tough, flexible, durable rubber like material with strong adhesive property on most building substrates and joints. STANDARD ASTM C 920 (G Grade) BS 5212 (Section Fuel Resistance) P Grade BS 4254 Din 18540 & US Federal Specification TTS00227 E Class

Additional Information:

• Delivery Time: Immediate
• Packaging Details: CICO SEALANT T 680 is available in 1kg and 4 kg kit

Product Details:

Economical and eco- friendly liquid roof waterproofing solutionbased on modified polyurethane

Product Details:

CHRYSO POLYGROUT is a low viscous liquid which reacts with water in a controlled manner to form a swelling resilient adhesives, solid in density and strength appropriate to the designed task. When injected under pressure into leaking structures and through the process of polymerization, a permanent flexible water barrier is formed.

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 10 KG

Product Details:

It is a fibre reinforced liquid applied waterproofing membrane which is impregnated with synthetic fibre. It is blended with PU modified binders and special PP fibres which takes care of minor cracks, dampness, and acts as a barrier coat exterior painting system.

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 1,5,20

Product Details:

ArmGrout Inject PU1 is used for the injection of water bearing cracks and joints in concrete and stone.ArmGrout Inject PU1 is used for• Stoppage of water inflows from cracks, joints, etc.• Compacting of loose stones.ArmGrout Inject PU1 meets the requirements of the Debt- leaflet“Brewerton Auswirkungen von Bauprodukten auf Beton und Grundasser (evaluation of the effect of construction production concrete and ground water)” dated November2000.

Additional Information:

• Delivery Time: immediate
• Packaging Details: 5.5 kg

Product Details:

PU Injection (1K) is a hydrophobic grout based on polyurethane. Upon contact with water, itreacts to form a closed cell rubber-like foam while expanding its volume up to 27 times.The cured material is of a constant volume. Since water is not a component of the foamstructure, the cured material is essentially not affected by water or dryness. The reacted materialdoes not shrink or swell. Depending on the pressure of injection, it reacts to a form a very densematerial or foam.

Additional Information:

• Delivery Time: IMMEIDATE
• Packaging Details: 10 KG DRUM

Product Details:

Elastomeric, single component, aliphatic polyurethane basedcold liquid applied waterproof coating systemProductDescriptionSikalastic???-450 (I) is a single-component; elastomeric, aliphatic polyurethane basedcold liquid applied, high build, waterproof coating system. It cures to form an elastic,seamless, waterproof coating with good crack-bridging properties.Uses Used as a seamless, impervious coating on roofs and concrete structures Protective coating in infrastructure projects in civil engineering on nontraffickedareas It has excellent adhesion to concrete, brickwork, asphalt, corrugated asbestos,and asbestos cement. Can be used for inverted roof structures

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 20 KG DRUM

Product Details:

MasterSeal® NP 473USingle component, moisture curing polyurethane, multi-use elastomeric joint sealant for horizontal & vertical applicationsDESCRIPTIONMasterSeal NP 473U is a high performance, one component, moisture curing, polyurethane construction sealant. It has been formulated with an optimum range of physical properties such as high elasticity and movement accommodation, non-sag, Shore A hardness, tensile / tear strength and modulus to make it perfectly suited for sealing dynamically moving joints in a wide range of internal and external, horizontal and vertical applications, making it almost the perfect “Universal” joint sealant.TYPICAL APPLICATIONS

Additional Information:

• Delivery Time: immediate
• Packaging Details: 600 ml packet

Product Details:

Sika® Injection-101h is a low viscous, fast foaming and solvent-free water-reactivepolyurethane injection foam resin, which cures to a dense flexible foam with a finecellular structure.Uses  Sika® Injection-101 h is used for the temporary water stopping of high waterintrusions in cracks, joints and cavities in concrete, brickwork and naturalstonework To achieve permanent watertight crack sealing, Sika® Injection-201 or Sika®Injection -203 should be injected subsequently.

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 16 KG

Product Details:

ASCOGUARD is a liquid applied acrylic emulsion based elastomeric coating. It can be applied as a waterproofing membrane or as a crack bridging paint on walls. ASCOGUARD is formulated using proven elastomeric acrylic resin to provide long term durability and maximum protection for concrete and metal surfaces.

Additional Information:

• Delivery Time: immediate
• Packaging Details: 20 kg

Product Details:

DescriptionCHRYSO CWA 10 PRO Crystalline waterproofing admixtureprotects and waterproofs concrete structures by crystallization.The active chemicals react with moisture and by product ofcement hydrate in the concrete resulting in crystallineformation within the pores and capillary tracts of concrete thuswaterproofing the structure against penetration of water andother liquids from any direction. CHRYSO CWA 10 PRO givesstrong and lasting waterproofing protection from harshenvironmental conditions.CHRYSO CWA 10

Additional Information:

• Delivery Time: immediate
• Packaging Details: 20 kg

Product Details:

GeneralZentrifix®-Elastic is a two-component mineral based polymer modified waterproofing and concrete protection system for specialized structures like dams, bridges, culverts, tunnels and all hydraulic structures where the water pressures are high. It is fully suitable for normal waterproofing requirement of terraces, parking structures, basements, swimming pools, sanitary areas etc. When two components are mixed and applied, the film formed is a thick elastic membrane with good abrasion and chemical resistance. It is most suitable for protection from chloride attacks.

Additional Information:

• Delivery Time: IMMEIDATE
• Packaging Details: 45 KG

Product Details:

DESCRIPTIONEpoxycote UW is a 100% solids containing pigmented two component system based on liquid epoxy resin with a special amine hardener. USE Epoxycote UW is a coating system for cement based surfaces such as concrete , plaster, and also for iron and steel in contact with potable water and food stuffs . The main fields of application are floor and wall surfaces, which are subjected to normal mechanical loads and aggressive chemicals. Typical use includes, storage tanks and silos in chemical industry, food industry, drinking water storage tanks, swimming pools, sewage works, septic tanks, sewage pipe lines etc.,

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 5 KG

Product Details:

STARBOND BA-SB-30 is an SBR latex based waterproofing bonding agent designed as an integral adhesive for slurry bond coats, mortars and concrete to improve bond strength and chemical resistance. It is ideal for producing high abrasion resistant floors, for use in internal and external renderings, flooring screeds and patch repairs. When dry the finished mortars or concrete show a vastly improved resistance to water. It can be used where improvements in physical properties of Portland cement systems are required. ADVANTAGES ??? Improves bond Strengths and to hardened concrete ??? Increases durability under freeze/thaw cycling. ??? Resistant to deicing salts. ??? Reduce cracking through increased mortar flexural strength. ??? Increases mortar wear resistance under rubber wheeled traffic. ??? Increases mortar tensile strength. APPLICATION AREAS ??? Toppings, patches and leveling course. ??? Thin Sets, terrazzo, stucco and bonding slurries. ??? General reconstruction work and latex modified overlays. ??? Bridge decks, highway and parking decks.

Additional Information:

• Delivery Time: Immediate
• Packaging Details: BA-SB-30 is available in 1,5,10, 20 kg drum & 50, 200 kg. Barrel.

Product Details:

DESCRIPTIONMasterEmaco S 340 micro concrete pourable mortar is a high flow, high strength formulation for structural concrete repairs and for general purpose repairsMasterEmaco S 340 is suitable for placing in thicknesses of 25mm to 200 mm.MasterEmaco S 340 provides a durable, strong structural repair fully compatible with host concrete.

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 25 KG BAG

Product Details:

Thermal Insulating Elastomeric Paint for Roofs and Walls

CICO THERMOSEAL – XL is water based elastomeric high build paint for concrete roofs and exterior walls. CICO THERMOSEAL – XL is heavily filled with specially selected hollow ceramic micro sphere and titanium di oxide. FUNCTION CICO THERMOSEAL – XL has dual effects. Firstly, it reflects more than 80% of sun rays thereby heating of roof surface reduces remarkably due to high amount of Titanium di oxide. Secondly, transfer of heat from roof surface is blocked due presence of ceramic micro sphere. When it is applied on exterior side walls and roof it reduces energy cost approximately 20%. AREAS OF APPLICATION CICO THERMOSEAL – XL is applied in areas such as walls and roofs of residential houses, industrial & commercial structures, cold storages, etc. 

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 1 Ltr, 5 Ltr, 20 Ltr & 50 Ltr.

Product Details:

Brushbond powder grey provides a seamless, waterproof coating suitable for use in water tanks, reservoirs, swimming pools, roofs and to ensure water tightness. Brushbond powder grey effectively protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases.Brushbond powder grey is designed to re-face and even out variations in concrete and masonry surfaces.Brushbond powder grey effectively seals concrete masonry walls and bridges the shrinkage cracks which are static. Brushbond powder grey provides a tough and durable coating which cannot be easily damaged or worn away.

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 7Kg , 27 Kg

Product Details:

ACRYLIC LATEX BASED WATER PROOFING ADDITIVE AND BONDING AGENT

DESCRIPTION RECOMMENDED USES FEATURES AND BENEFITS APPLICATION PROCEDURE Waterproofing Hydroment 476 Crete HS is a specially formulated acrylic admixture used in place of Water to fortify leveling screeds, renders and waterproofing additive Waterproofing ofwatertanks, roofs, balconies, terraces, wet areas, swimming pools and fountains. Bonding old to newconcrete. Additive for repairmortar. Good waterproofing property No degradation on long term exposure Excellent bonding properties Enhances strength and durabilityof repairmortar Suitable forexternaland internal repairs

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Hrdroment 476 Crete HS is supplied in 1, 5, 20 & 200 litre drums

Product Details:

SBR LATEX EMULSION ADDITIVE

DESCRIPTION RECOMMENDED USES FEATURES & BENEFITS Boscocem SBR is a styrene butadiene rubber latex emulsion additive. It is designed for use as an integral bonding agent with cement-based products in slurry bonding coats, mortars, screeds, renders and tile adhesives. It is used to improve adhesion to properly prepared substrates. The tile adhesive so prepared is good forbonding alltypes oftiles. Cement based toppings, patching mortars, leveling compounds and ter razzo, Waterproof ing cement/sand renders / screeds, Bonding concrete repair mortars, Bonding agent for ceramic tiles, bricks, etc., Preparation ofspatterdash 

Product Details:

SikaTop® Seal 109 hiElastic, liquid applied crack bridging, 2 Pack acryliccementitious waterproofing coating systemProductDescriptionSikaTop® Seal 109 hi is an elastic liquid applied, crack bridging 2 pack acrylicpolymer modified cementitious waterproofing coating systemUses  Used as a seamless, impervious coating on flat roof for both exposed andconcealed waterproof coating system Basements, water retaining structures, underground concrete structures, pitsbasins, sumps etc.

Additional Information:

• Delivery Time: 7 DAYS
• Packaging Details: 30 KG POWDER AND 20 LTR LIQUIED

Product Details:

Acrylic based multipurpose polymer for repair and waterproofing

Sika® Raintite I is a multifunctional polymer emulsion for enhancing the properties of mortar/ concrete / grout/ cement slurry providing good adhesion, water resistance and improvement of several other properties.

 Waterproofing of roof slabs, sunken slabs, basements, water tanks, sunshades, etc.  As a bonding agent for uses in repair and plastering  For making polymer mortar for repairs mortars etc.  Treatment for leaching and salt petre action  Multipurpose mortar admixture for injection grouts  Additive to cement based paints for waterproofing 

Product Details:

Acrylic based waterproof coating system for concrete andmasonry

Sika® CemCrete when used in combination with cement improves the shortcoming of plain cement. Sika® CemCrete acrylic polymer enhances the properties of cement slurry/ mortar/concrete making them excellent choice for use in new construction as well as renovation work.

Product Details:

Mortar and slurry modifier cum bonding aid 

Sika® Latex is a synthetic rubber emulsion which when added to cement mortar/concrete/grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of mortar/concrete/ cementitious grout.

Product Details:

2-part water based protective epoxy coating

Sikagard® -67 is a water based, solvent free, odourless, epoxy resin protective coating.

Applied on concrete, rendering, stone, asbestos and cement „ Protective coating against weathering and mild chemical attack in areas such as cantilevers, galleries, retaining walls, basements, workshops, reservoirs and balconies 

Additional Information:

• Delivery Time: IMMEDIATE

Product Details:

Brushbond Roofguard is high build fi bre reinforced seamlesswaterproofi ng render suitable for waterproofi ng of old & newroofs, it is a polymer base product applied in three OR morecoats & each coat with diff erent colours for monitoring correctthickness.The product can be applied directly on existing concrete,brickbat coba, and screed concrete even without removal providedthe substrates are sound enough for application of thecoating avoiding the risk of damage to the old roof associatedwhile removing of the existing overlays. The product providesa seamless, tough durable water resistant coating which canwithstand light pedestrian traffi c and also has excellent weatherresistance for exterior applications.

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 20 LTR

Product Details:

Recommended primer for Fosroc cementitious repair system.For improving and bonding floor toppings, renders andmortars; repair of worn, damaged or spalled concrete; polymermodified floor screeds.

Additional Information:

• Delivery Time: immediate
• Packaging Details: 20 Ltr

Product Details:

DESCRIPTIONBoscolastic is a 2-component flexible acrylic polymercementitious waterproofing coating that is mixed onsite and resurfaced on concrete and other constructionmaterials to waterproof. Boscolastic has excellentweathering resistance and crack bridging property.

Additional Information:

• Delivery Time: immeidate
• Packaging Details: 35 kg

Product Details:

sbr based water proofing material

Additional Information:

• Delivery Time: immediate
• Packaging Details: 20 ltr can

Product Details:

SBR based Bonding Agent and Polymer Component for Repair Mortars, Cement Screeds, Water Proofing and Polymer Cement Concrete

Strength of adhesion to the base is distinctly improved allowing structural bonds between existing substrate and fresh mortar• Non-toxic and can be used with potable water• Nafufill SBR admixed mortars are easy to work with and can be drawn to very thin layers• The modulus of elasticity is reduced; flexibility of hardened mortars is improved thus avoiding stress cracks in the repair/screedsystems• The compressive and flexural strength is increased compared to the reference mix• More economical than Epoxy or Polyester Resin mortar• The fresh mortar is considerably plasticized• Reduced degree of shrinkage• Increased bending tensile strengths• Controlled thermal expansion• Increased chemical and abrasion resistance• Lowering the permeability and chloride ingress• Increased resistance to carbonation

Additional Information:

• Delivery Time: IMMEIDATE
• Packaging Details: 30 KG DRUM

Product Details:

ASCOFLEX SUPER is a thin, load bearing membrane composed of a modified synthetic elastomeric copolymer with excellent elongation properties and high strength. ASCOFLEX SUPER crack bridging membrane used for long-lasting waterproofing. When ASCOFLEX SUPER is applied on substrate, it forms a 100 % waterproofing, permanent elastic, black seamless membrane without joints or leak possibilities. The product has a dark bluish color but will turn into a black membrane when drying with anti-roots properties.

Additional Information:

• Delivery Time: immediate
• Packaging Details: 20 kg

Product Details:

Sikagard® -63 is a solvent free, high build thixotropic epoxy resin based protective coating with high chemical resistance.

Uses
?? Abrasion resistant universal coating material designed for normal to highly aggressive chemical environments
?? For use on concrete, cementitious mortars and rendering, epoxy mortars (including Sika® EpoCem® ) and stee
l
?? For protective lining of storage tanks, silos and bund areas
?? As an anti-corrosion coating in food and beverage processing plants, sewage works, agricultural, chemical and pharmaceutical plants, bottling plants etc.
?? Also used as part of glass fibre reinforced self supporting linings with crack bridging properties for bund areas and storage tanks

Characteristics / Advantages

?? Very good chemical and mechanical resistance
?? Liquid proof (according to the products chemical re
sistance table)
?? Easy application
?? Solvent free 

Additional Information:

• Packaging Details: Part A: 3 kg containers Part B: 1 kg containers Part A+B: 4 kg ready to mix units

Product Details:

AquaArm TG is a Cementitious, polymer dispersion based flexible protective coating and waterproof barrier. Thisproduct is two-component and resistant to water, moisture and abrasion. Its liquid mixing component is solvent free. AquaArm TG is a stand-alone product. It can be top or over coated with flexible or rigid mortars, stuccos or coatings for uniform appearance.

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 45 KG

Product Details:

CHRYSO TAPELASTIC-PREMIA is a two component, highperformance, elastomeric, acrylic polymer modifiedcementitious waterproofing protective coating system in slurryform.

Additional Information:

• Delivery Time: immeidate
• Packaging Details: 12 kg box

Product Details:

AquaArm WPU 1K-E is a single-component, liquid applied, elastomeric polyurethane coating for waterproofing concrete surfaces. AquaArm WPU 1K-E provides excellent resistance to moisture, water, and salts penetration into concrete and masonry surfaces.

Additional Information:

• Delivery Time: immeidate
• Packaging Details: 25 kg drum

Product Details:

Product DescriptionSingle component water based acrylic waterproof coating. It can be applied to most structural surfaces to make them waterproof. The coating is UV stable and highly reflective with high flexibility.

Additional Information:

• Delivery Time: IMMEIDATE
• Packaging Details: 25 KG DRUM

Product Details:

Starcem 2K is a two component cementitious & acrylic polymer based flexible waterproofing & protective coating Made up from best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and similar structures. Specially designed for swimming pools, submerged tunnels, sumps, bridge decks, marbles, granites retaining walls, pile Heads, water tanks and a wide variety of extreme service class structures because on curing it forms an excellent elastomeric, tough, waterproof & protective layer over the substrate

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 15Kg,30Kg