POLYURETHANE SEALANT

Product Details:

Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2- component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.

PRODUCT BENEFITS  Bonds well to a wide variety of substrates  Resistant to ageing  Can be sanded and painted  Passes EN45545-2 R1/R7 HL3  Non-corrosive   Low odor

Additional Information:

• Delivery Time: Immediate

Product Details:

Bostik Seal ‘N’ Flex 1 is a low modulus, one component,Class-A polyurethane sealant. When cured it will form atough & flexible seal capable of cyclic expansion &compression movement of 100% (±50%) of the originalinstalled joint width.

Additional Information:

• Delivery Time: IMMEDIATELY
• Packaging Details: 600ML TUBE

Product Details:

DescriptionShaliSeal® PU GG is single component Polyurethane elastomeric sealant. ShaliSeal® PU GG resists crack arising out of movements of joint materials.It conforms to EN 14187-S 2003, BS 5212, ASTM C-920, ISO-11600

Additional Information:

• Delivery Time: immediate
• Packaging Details: 0.600 ml x 20

Product Details:

DESCRIPTIONSikaHyflex®-160 Construction is a 1-component, moisture-curing, elastic joint sealant.USESSikaHyflex®-160 Construction is designed for movementand connection joints in concrete and masonryfacades.CHARACTERISTICS / ADVANTAGES

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 600 ML

Product Details:

For sealing and maintenance of horizontal joints in concreteroads, concrete runways and hard standings. The excellentfuel resistance of Colpor 200PF makes it particularly suitablefor sealing areas where fuel and oil spillage might occur such

Additional Information:

• Delivery Time: 5 DAYS
• Packaging Details: 3 LTR

Product Details:

SEALANT FOR CONCRETE AND MASONRY FACADESDESCRIPTIONSikaflex® Construction+ is a 1-component, moisturecuring,elastic joint sealant.USESSikaflex® Construction+ is designed for movement andconnection joints in concrete facades.CHARACTERISTICS / ADVANTAGES??? Very good resistance to weathering??? Movement capability of ± 35 (ASTM C 719)??? Bubble-free curing??? Good workability??? Good adhesion to many substrates??? Solvent-free??? Very low emissions

Additional Information:

• Delivery Time: immediate
• Packaging Details: 600ml

Product Details:

One part, PU based Building & ExpansionJoint SealantNitoseal PU40UsesNitoseal PU40 is suitable for sealing joints in concrete, brickwork,blockwork, precast panels, stone cladding, perimeter sealingaround doors and windows, and non traffi cked fl oor joints.Advantages  Adhesion to most common building materials Single component with fast rate of cure Easy to apply UV resistant Primerless for most applications (see “Priming Available in a range of colours ISO11600:2002 Type F 25LM compliant

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 0.600 ML

Product Details:

HYPERSEAL®-EXPERT-150 is a novel low modulus expansion joint sealant, especially formulated to ensure bubble free cure even at very high temperature and humidity climatic conditions. The product displays excellent thixotropy allowing its use even in very large expansion joints. It cures by reaction with atmospheric humidity to produce a joint sealant with a 50% joint movement accommodation factor and excellent adhesion on substrates traditionally problematic for PU sealants, e.g. glass, aluminum, steel, polycarbonate, etc. The extrusion rate and tooling of the sealant remain the same throughout a very wide range of temperature and humidity conditions.

Clean joint thoroughly, and ensure that no oil, grease and wax contaminants, silicone remains are present. For many applications, primer is not required. In the case of application on very porous substrates, bond area surfaces thoroughly to avoid the possibility of air bubbles being blown into the uncured sealant if the substrate temperature rises. The recommended primer is MICROPRIMER-PU. Apply backing material such as open cell polyurethane or a closed cell polyethylene backing rod. Although both types of backing rod are recommended, care must be taken when using the closed cell polyethylene rod that the outer skin not be punctured as in rising temperature conditions it may cause bubbling. Backing rod application is important as it ensures that the correct width to depth ratio is achieved to provide a firm backing against which the sealant can be tooled off

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 600 ML

Product Details:

HYPERSEAL®-EXPERT 60FC is a fast curing joint sealant, general purpose adhesive with excellent early grab adhesion even on substrates traditionally problematic for PU sealants, e.g.aluminum, steel, polycarbonate etc. HYPERSEAL®-EXPERT 60FC has excellent chemical resistance and is recommended in applications of sealing joints where contact with water polluting liquids occurs

Excellent adhesion on almost any type of surface, with or without the use of special primers. Excellent extrusion, tooling and storage stability over wide range of climatic conditions. Excellent chemical resistance Microorganism and fungus resistant

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 600 ML

Product Details:

POLYURETHANE SEALANT APLICATION GUN

Additional Information:

• Delivery Time: IMMEIATE
• Packaging Details: 1 PICES

Product Details:

DESCRIPTIONSika® Primer-3 is a one-part, solvent containing primerfor Sikaflex® & Sika® Polysulphide range of joint sealantsUSES

Additional Information:

• Delivery Time: immeidate
• Packaging Details: 0.5 ltr

Product Details:

oNE COMPONENT POLYURETHANE WATERPOOOFING LIQUID MEMBRANIE

Mixing of the two components: Smart Care PU Magnum 2 component) Part - A (base) and Part - B (hardener) are packed in two separate containers, having the correct predetermined mixing ratio by weight. Stir individual container separately, Part - A and Part - B very well, to get homogeneous material. The whole quantity of Part - B is added into Part - A. The two components should be mixed for about 2-3 minutes with a low-speed mixer (300 rpm), until the mixture becomes uniform. It is important to stir the mixture thoroughly near the sides and bottom of the container,to achieve uniform dispersion of the 

Additional Information:

• Delivery Time: immeidate
• Packaging Details: 25 kg