Tile Adhesives

Product Details:

ADMIX GT 1 is a white synthetic polymer additive for use with cement based grouts such as CEMENT POLYMER GROUT, SUPER GROUT and WIDE JOINT GROUT for tile joint grouting works.

The addition of ADMIX GT 1 to cement based grouts improves the adhesion strength to tiles, abrasion resistance, flexibility and reduces the water permeability of the grouts.  

Additional Information:

• Production Capacity: 100 ml & 1 L
• Delivery Time: immediate
• Packaging Details: 100 ml & 1L

Product Details:

Polymer based adhesive for fixing small to medium format ceramic tiles and small format natural stone on dry areas of interior floor & interior wall upto a height of 3 Mtrs.

All surfaces should be between 40° F(4°C) and 104° F(40°C) and structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds. Check the surface to be true to plumb. All slabs must be plumb and true to within ¼”(6mm) in 10 ft(3m). Rough or uneven concrete surfaces should be made smooth with LATICRETE® Screed/Plaster material to provide a wood float (or better) finish. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off. Installation may be made on a damp surface. New concrete slabs shall be damp cured and 28* days old before application. *No minimum cure time for concrete slabs when thin-set mortar is mixed with latex additive. Expansion joints shall be provided through the tile work from all construction or expansion joints in the substrate. Do not cover expansion joints with thin set mortar. Follow ANSI Specification AN-3.8 “Requirements for Expansion Joints” or TCA Detail EJ171 “Expansion Joints”. For tile installation over Cement Backer Board: follow TCA installation details W244. NOTE: For tile or stone installations on plywood and wood substrates, MYK LATICRETE DWA 215 OR MYK LATICRETE PUA 212 is recommended. Please refer specific product Technical Data Sheet for detailed recommendations. 

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 20KG

Product Details:

Off White Tile Adhesive- Suitable for Domestic Tiling- Rigid Surfaces- Use with ASA Megalastic to upgrade flexibility andbond strength but maintaining long open time

Additional Information:

• Delivery Time: 5 DAYS
• Packaging Details: 30KG

Product Details:

B 30 is an advanced, cementitious, structural grout. It has a blend of portland cement, graded aggregates and additives. B 30 is versatile and can be prepared to be of flowable or pumpable consistency by adding the required amount of clean water. This free flowable grout can be used in gap width of minimum 10mm. 

B 30 is used in precision grouting of heavy machinery base plates, compressors, generators, and other equipment demanding high strength properties. It is used for grouting of anchor bolts and prefabricated concrete panels. B 30 is also suitable for general bore packing and void filling requirements. 

Additional Information:

• Production Capacity: 25Kg
• Delivery Time: Immediate
• Packaging Details: Approx. 13 ltrs for 25kg bag (Free flow consistency)

Product Details:

Grey, polymer modified adhesive suitable for fixing ceramic tileson walls & floor in interior dry situations on cementitiousbackgrounds.Note: Not recommended for direct use onto gypsum plaster(wall finishes), paint or metal

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: 20 KG

Product Details:

DESCRIPTIONPolymer modified grey cement-based adhesive, suitable forfixing ceramic tiles for floors & walls in interior situations.Suitable for fixing ceramic tiles upto 6 mm bed thickness (can beextended up to 12 mm thickness in area of limited extent). Theset adhesive is water-resistant and is suitable for use in showersand bathrooms.Note: Not recommended for direct use onto gypsum plaster(wall finishes), paint or metal.STANDARDSSILVER

Additional Information:

• Delivery Time: immediate
• Packaging Details: 26 kg bag

Product Details:

SmartCare PreApply HDPE 40 is a thick high density polyethylene membrane with a pressure-sensitive adhesive. Unlike conventional membranes, this forms a bond with the wet concrete poured over it and becomes monolithic part of the structure. This prevents water ingress tracking between the unbonded membrane and structure

Additional Information:

• Delivery Time: Immediate

Product Details:

Tile spacer 2mm, 3mm, 4mm  ( Ardex & MYK )

Additional Information:

• Production Capacity: 100
• Delivery Time: Immediate
• Packaging Details: 50 Nos , 100 Nos