Tile Grout

Product Details:

Description / Advantages: Three component chemical resistant epoxy resin based tile joint filler for floor and wall tiles

Can be used as a tile joint filler in industrial floor, laboratories , hospitals. Can be used where acid resistant tiles are used  

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 1 Kg

Product Details:

Polymer based, Un-sanded cement grout for interior & exterior, floor & wall joints of width 1mm – 3 mm

Designed for interior and exterior floor and wall joints of all types of ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, precast terrazzo, engineered stone floors and natural stones. Recommended for Institutional and commercial general floor and wall areas. Can be mixed with water or Laticrete 1776, grout admix plus and used for filling the joints of width 1mm to 3 mm

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 1 Kg & 10 Kg bag.

Product Details:

DESCRIPTIONA high quality polymer-modified, water resistant, cement basedgrout designed for grouting glazed wall tiles, porcelain tiles,mosaic, vitrified & fully vitrified tiles, natural and engineeredstones.

Using a grout float or rubber squeegee compact the mixed grout into the joints ensuring that they are completely filled. Work in small areas and remove as much excess grout from the tile surface as possible. Do not exceed the working time of the grout
Allow about 15 minutes for the grout to dry. Using a damp sponge, clean the tile/stone surface diagonally to the joint line
Finally wash down with clean water and sponge to remove any dried grout film from the tile/stone surface
Once the grout has sufficiently set within the joints, polish the tile/stone surface with a clean cloth. Alternatively give a final wash down with clean water using a dampened sponge.

Additional Information:

• Delivery Time: Immediate
• Packaging Details: 1Kg , 10Kg

Product Details:

Sika cementecies tile grout